Frequently bought together
-
Professional 3-Stage Electric Knife Sharpener (This item)
25 avis89,99€
-
Cut-resistant HPPE Kitchen Gloves - Level 5
18 avis7,99€
-
Nakiri Knife 16 cm Blade – Premium Stainless Steel
12 avisSale price 34,99€ Regular price
49,90€ -
Polyethylene cutting board - HDPE - 36 × 28 cm
56 avis39,00€
Restore your knives to surgical precision in seconds with the 3-stage electric diamond sharpener. Its 3-stage system (360# / 600# diamond + 1,000# polishing resin) combined with a 20W motor at 2,800 rpm restores, refines, and polishes all your smooth blades — no manual effort, no special technique required. Its magnetic collection tray keeps your workspace clean after each use.
Why choose the 3-stage electric sharpener?Imagine a chef's knife that glides through a tomato instead of tearing it, a utility blade that pushes vegetables instead of slicing them cleanly. The solution? In less than 30 seconds, diamond abrasives precisely remove the necessary amount of metal - not too much, not too little - and the high-speed motor ensures consistent sharpening from heel to tip, without angle variations.
High-quality diamond wheels for precise and controlled material removal. No overheating of the metal, no alteration of the steel's temper.
Repair (360#), refining (600#), and resin polishing (1,000#): a complete cycle for all situations, from very dull blades to mirror finish.
Metal filings are collected by an integrated magnetic tray. Guaranteed clean workspace - no more metallic dust on the countertop.
The secure angle guide keeps the blade in the correct position with each pass. No risk of contact with the grinding wheels outside the sharpening area.
20W motor sized for intensive use in professional kitchens as well as for regular home maintenance. Consistent results in all cases.
Three complementary abrasion levels for a complete cycle. Choose your starting point based on the blade's condition — no need to go through all three stages if your knife is still in good condition.
For very dull or damaged blades. The coarse 360 grit quickly reshapes the edge geometry and prepares the blade for subsequent stages.
The regular maintenance stage. Refines the edge created in stage 1 and is sufficient for the vast majority of daily uses — chef's knives, paring knives.
The finishing touch. The 1,000 resin removes micro-burrs and smooths the edge for perfect gliding through food and an edge that lasts.
- Very dull or damaged knife: stages 1 → 2 → 3.
- Regular maintenance: stages 2 → 3 only.
- Quick refresh: stage 3 only — 3 to 5 passes.
20W at 2,800 rpm: powerful enough for quick and continuous sharpening, without overheating or loss of speed between passes. Ideal for sharpening multiple knives consecutively.
The integrated angle guide automatically holds the blade in the correct position - no angles to calculate, no technique to master. Insert, pull, it's sharp.
Place the device on a flat surface. The non-slip silicone base ensures total stability. Plug in and let the motor reach its operating speed (1 to 2 seconds).
Depending on your blade's condition: stage 1 (360#) if very dull, stage 2 (600#) for regular maintenance, stage 3 (1000#) alone for a quick refresh before use.
Slide the blade into the protected angle guide. Gently pull towards you, from heel to tip, in a smooth motion and without pressure. The motor and abrasives do all the work.
Always finish with stage 3 (1,000# resin). 3 to 5 passes are sufficient. Test on a sheet of paper or a tomato skin: the cut should be clean, smooth, and silent.
Let the motor do the work for you. No pressure is needed on the blade — simply pull with the natural weight of the knife. Excessive pressure does not speed up sharpening; it wears out the grinding wheels faster and can create an irregular edge. For optimal results, make 3 to 5 passes per stage, no more — and change stages as soon as you feel the edge returning.
| Specification | Details |
|---|---|
| Brand | Neutral |
| Type | Electric Diamond Knife Sharpener - 3 Stages |
| Abrasives | 360# Diamond (repair) + 600# Diamond (refining) + 1,000# Resin (polishing) |
| Motor | 20 W / 2,800 rpm |
| Power Supply | AC 230 V - 50 Hz - 75 mA |
| Collection Tray | Integrated magnetic - collects metal filings |
| Safety | Non-slip silicone base + Protected blade guide |
| Compatibility | Straight-edged knives: chef's, paring, utility - stainless steel and carbon steel |
| Not compatible | Ceramic blades, serrated knives (bread, steak) |
This sharpener is for those who want fast, professional results, without technique and without clutter, whether at home or in a professional kitchen.
Keep all your knives in perfect condition. The magnetic tray makes cleaning easy after each session - ideal for cooks who sharpen regularly.
The 20W motor is sized for intensive use. Quickly restore multiple blades in a row without loss of speed or overheating.
Secure guide, non-slip base, included manual: a simple and safe tool to keep your knives sharp daily.
Complete pack with protectors and manual, neat design: an immediately operational gift for any cooking enthusiast.
Delivery times may vary from 3 to 7 days depending on the products. The estimated delivery time will be indicated before and during order tracking.
The different payment methods are indicated on the product and payment pages . A wide selection is available!
You can track your order in the "Track my order" tab by entering the order number or with the Shop link provided by email.
Please use the return form at the end of our terms and conditions. Send it to the following email address: info@just-cook-eat.com
